Stretch Blow Moulding Machine for PET

graphic1.jpg (26866 bytes)

Technical Specifications

        Specifications Unit SPM 1 SPM 5 SPM 20
Article Volume (Max.) Litre 1.5

7 (Single  Cav.)
2 (Double Cav.)

 30
Neck Ø (Max.) MM 46 120 120
Article Ø (Max.) MM 100 190 300
Article Length (Max.) MM 300 340 500
Number of Cavities Nos. 2

2 ( upto   90 MM/2 Lt.)
1 (Above  90 MM)

 1
Centre distance betn. 2 cav. MM 135-140 175-180 N.A.
Production Rate Articles/ Hour 480-600

200-280 (Single  cav.)
400-450 (Double cav.)

 50-75

MECHANICAL DATA
Stretching Stroke MM 330 370 540
Mould Clamping/Locking Type Hydro Pneumatic Hydro Pneumatic Hydro Pneumatic
Mould Clamping Force MT 8 15 30
Mould Clamping Stroke MM 150 250 350
Mould Opening (Max.) MM 140 240 340
Mould Thickness (Min.) MM 160 260 400
Daylight (Max.) MM 300 500 740
Distance betn.Tie Rods (HxV) MM 320 x 160 380 x 175 460 x 340
Blow Pin Type Pneumatic Hydro Pneumatic Hydro Pneumatic
Blow Pin Clamping Force MT - 4 4

I.R. OVEN
Heating System Type Infra Red Infra Red Infra Red
Total Connected Load kW 10.5 12 18

AIR REQUIREMENT
Working Air Pressure Kg/cm2 8 - 10 8 - 10 8 - 10
Blowing Air Pressure (Max.) Kg/cm2 25 25 25
Total Air requirement CFM 20 to 25 35 to 40 35 TO 40
Compressor HP 10 to 15 15 to 20 15 TO 20

OVERALL DIMENSIONS
Machine (L x W x H) MM 1235x1230x2300 1550x1275x2550 2180x1390x3460
I.R. Oven (L x W x H) MM 1420x640x925 1420x640x925 1420x640x1040
Total Weight approximately
(with oven)		 KG 900 1200 2400

Note : Above specifications are subject to change without prior intimation.

For More details kindly contact
M/s. Kalpana Trading Co.
1143/2, Old Madhupura, O/s. Delhi Gate,
Ahmedabad-380 004. [Gujarat] INDIA.
Phone : + 91-79-2159149,     2165983
Fax : + 91-79-2130022.
Works Phone : + 91-2764-86350
email : soni@wilnetonline.net

[Stretch Blow Machine]     [PET Preforms]      [Caps & Closures]
[PET Articles]     [Other Activities]   [Home]